网带淬火炉,热处理炉厂家,燃气台车炉
your current location : home >> News >> Technical information

ContactContact Us

Changxing Yongcheng Industrial Furnace Co., Ltd.

Contact person: manager Shen

Tel: 13905825430 (same as wechat)

Tel: 0572-6871666

Email: ilqt521@163.com

website: www.ycdl1818.com

website:en.ycdl1818.com

Address: Qiaonan Industrial Zone, Lincheng Town, Changxing County, Huzhou City, Zhejiang Province

The superheat of muffle furnace shell can be improved by using double sheet metal

2020-05-13 13:30:57
times

The shell of muffle furnace is made of double sheet metal, furnace, lining, insulating layer, inner liner, air insulation layer, outer shell forced cooling between inner shell outer shell. The problem of furnace body is greatly improved. The box temperature is too high the working environment of operators. Muffle furnace is a common heating device in laboratory heat treatment workshop. Most of the traditional firebrick muffle furnaces still in use are hot. The trouble with wiring is a problem encountered by many users.

The upper part of the furnace is the heating area, the lower part is the circuit area. The control circuit is connected to the heating circuit inside the furnace. After the power supply is plugged in, the user can use it directly. Installation connection are very simple. The circuit is protected in the enclosure the circuit is visible the outside. The security is greatly improved. However, the production technology technology of muffle furnace also keep pace with the times. We dig deep into the pain points of users, sum up experience, constantly improve. Easy to use, safe reliable muffle furnace is suitable for users.

The traditional muffle furnace usually adopts a single shell, the hot chamber is directly wrapped by iron sheet. This is a common practice in production has the advantages of simple structure low cost. But the disadvantages are also obvious: the temperature of the shell is very high when it is used for a long time, so the user needs to connect the controller circuit heating circuit by himself, the thermocouple also needs to be connected by the customer himself. It's a small challenge. Because of its simple structure bare conductor joint, there is no small potential safety hazard.


马弗网带炉

label

Recently Viewed:

Copyright © Changxing Yongcheng Industrial Furnace Co., Ltd. All rights reserved case number:浙ICP备09103042号

Disclaimer: Some of the content pictures on this site are from the Internet. If there is any infringement, contact the administrator to delete it as soon as possible, thank you!
service support:China enterprise window