Mesh belt furnace is a kind of mesh belt furnace, which makes the mesh belt move forward intermittently continuously through mechanical transmission, so as to make the workpiece pass through the temperature control heating zone, so as to meet the requirements of heat treatment process.
Mesh belt heating furnace: it is composed of feeding table, heating section, discharging table, hot air circulation, mesh belt transmission temperature control system. It is mainly used for heat treatment of aluminum copper bars before punching, annealing of castings, glass products, tempering of small parts.
The whole equipment consists of furnace body, mesh belt transmission system temperature control system. The furnace body is composed of feeding section, pre sintering section, sintering section, slow cooling section, water cooling section drainage section. The belt transmission system consists of high temperature resistant belt transmission device. The running speed of mesh belt is regulated by frequency converter equipped with digital network speed measuring device. The speed of the mesh belt can be read directly. The temperature control system is composed of thermocouple, digital intelligent PID regulator thyristor, forming a closed-loop control system, which can realize automatic accurate temperature control.
The heating elements are FEC ceramic heating plate ceramic heating rod. The temperature control system is controlled by multistage intelligent program thermostat imported Japan. The data communication interface can be configured as required. The design concept of frequency conversion stepless speed regulation, heat-resistant steel mesh belt transmission large angle design of tensioning wheel ensure the smooth transportation of products.
The mesh belt of mesh belt furnace is a vulnerable part. In the process of heat treatment, especially carburizing, it is often replaced. Please discuss how to prolong the service life of mesh belt.
The quality of mesh belt material plays a decisive role in the quality of mesh belt. For example, the working state of the transmission system, the size of the load, the temperature level whether the carburizing process is carried out will greatly affect its service life
1. When maintaining the network, clean, lubricate adjust the internal external sliding surfaces, screws, racks, gear boxes, oil holes other parts of the equipment within the cleaning time. Ensure that the oil seal of each part will leak, also need to clean the surrounding equipment residues, debris, dirt, etc.
2. Equipment shall be placed in tools, fittings, parts, etc. in order, pipes pipelines shall be placed in the structure.
3. Ensure that the belt has good lubricity. When refueling refueling in time, there should be no dry friction during continuous refueling. In order to ensure the normal oil pressure, the oil mark should be bright smooth, the oil should meet the requirements, the oil gun, oil cup felt should be clean.
4. Use the equipment according to the specifications during operation. The equipment should be overloaded. The protection device of the equipment shall be complete reliable, the bad factors shall be eliminated in time.
Address: Changxing Yongcheng Industrial Furnace Co., Ltd., Qiaonan Industrial Zone, Lincheng Town, Changxing County, Huzhou City, Zhejiang Province